ELECTRIC RIFLE
POLYMER RECEIVERS
ALUMINUM M-LOK HANDGUARD WITH ANGLED FOREGRIP
UPPER STANDARD 20mm RAIL
6-POSITIONS ADJUSTABLE RETRACTABLE STOCK
300 ROUNDS HI-CAP POLYMER MAGAZINE
FLIP-UP SIGHTS
SPECNA ARMS HAL ETU
BATTERY COMPARTMENT INSIDE STOCK PIPE
DEANS PLUG WITH MINI-TAMIYA ADAPTER INCLUDED
LENGTH 655mm - 735mm
WEIGHT 2280g
BATTERY AND CHARGER NOT INCLUDED

SPECNA ARMS PRESENTS THE CORE™ LINE WITH THEHAL™ CHIP
THE TRIGGER CONTROL SYSTEM SUPPORTS THE REPLICA'S PERFORMANCE, AND ALLOWS PROGRAMMING OF FUNCTIONS EASILY USING THE TRIGGER AND SELECTOR.
HAL™ CHIP FEATURES:
 - TRIGGER DETECTION BASED ON MAGNETIC SENSORS AND HALL EFFECT
 - ACTIVE BRAKE
 - BINARY TRIGGER
 - ADJUSTABLE TRIGGER SENSITIVITY (5 LEVELS FROM 20 TO 100%)
 - ADJUSTABLE PRE-COCKING (6 LEVELS)
 - AUTO PROGRAMMABLE FIRE MODES (FULL AUTO, SEMI, 3-RD BURST, 5-RD BURST)
 - SEMI PROGRAMMABLE FIRE MODES (SEMI, BINARY, AUG, SNIPER)
 - EASY PROGRAMMING VIA TRIGGER
 - LOW BATTERY ALARM
 - COMPATIBLE WITH BRUSHLESS MOTORS

**THE AUTO FUNCTION FIRES A 3 ROUND BURST FIRST THEN FIRES FULL AUTO.

THE BODY, THE SLIDE, INCLUDINGTHE ENLARGED SF-TYPE STOCK THAT ACCOMMODATES THE BATTERY, AND THE PISTOL GRIP ARE MADE OF NYLON FIBRE-REINFORCED POLYMER.
OTHER COMPONENTS SUCH AS THE BARREL, RIS FRONT, FLAME SUPPRESSOR, ENLARGED RELOADING HANDLE AND TACTICAL SLING ASSEMBLY ARE MADE OF METAL (ALL SCREWS, PINS, SHELL EJECTION WINDOW AND DUMMY LOCK ARE MADE OF STEEL).
THE BARREL IS MARKED WITH THE SERIAL NUMBER.
THE REPLICA IS VERY WELL-FITTED, THE USER WILL NOT EXPERIENCE ANY PLAY BETWEEN THE LOWER AND UPPER PARTS OF THE BODY.
THE USE OF LIGHTWEIGHT POLYMER BODY ALLOWED TO REDUCE THE WEIGHT, WHICH MAKES IT PERFECT FOR DYNAMIC GAMES OR PROLONGED MILSLIMS.
WHAT'S MORE, THE FIBREGLASS REINFORCEMENT ALSO MAKES THE BODY STRONGER THAN POLYMER AND METAL BODIES.

THE REPLICA USES THE QUICK SPRING CHANGE SYSTEM, ESA™.
THIS ALLOWS QUICK AND EFFICIENT ADJUSTMENT OF THE REPLICA'S POWER TO THE CONDITIONS EXPECTED ON THE FIELD OF PLAY WITHOUT THE NEED FOR ACCESS TO A WORKSHOP OR A NUMBER OF SPECIALISED TOOLS - SIMPLY UNSCREW THE BUTT GUIDE TO REVEAL ACCESS TO EXCHANGE THE SPRING WITHOUT HAVING TO PULL OUT OR DISASSEMBLE THE GEARBOX.

THE ADVANTAGES OF THE ESA™ SYSTEM ARE DIFFICULT TO OVERSTATE.
IN VIEW OF THE ARRANGEMENTS WITHIN THE ENVIRONMENTS THEMSELVES, THIS SYSTEM GUARANTEES THE USER CONSIDERABLE POSSIBILITIES AND A GREAT DEAL OF FREEDOM.
THE ESA™ SYSTEM ALLOWS THE MAINSPRING TO BE CHANGED WITH A MINIMUM OF TIME AND, CONSEQUENTLY, THE REPLICA'S DISCHARGE VELOCITY TO BE ADAPTED TO THE AREA OF PLAY SO AS TO GUARANTEE AN IDEAL COMPROMISE BETWEEN THE EFFECTIVENESS OF THE FIREARM AND THE SAFETY OF ONESELF AND OTHER PLAYERS.

THE REPLICA HAS BEEN FULLY ADAPTED TO WORK WITH LIPO AND LIFE TYPE BATTERIES.
WITH A BASE INITIAL DISCHARGE VELOCITY OF ~380 FPS GUARANTEED BY THE PRE-INSTALLED MAINSPRING, THE REPLICA IS PERFECTLY SUITED FOR MEDIUM RANGE OPERATIONS.
AN M90-TYPE SPRING IS ALSO INCLUDED, WHICH ALLOWS THE INITIAL VELOCITY TO BE REDUCED TO~310 FPS, MAKING THE REPLICA PERFECTLY SUITED FOR SHORT-RANGE OR INDOOR OPERATIONS.

THE GEARBOX CONCEALS 8-MM SLIDE BEARINGS AND THE SUPPORTED STEEL GEARS.
THE SYSTEM IS SECURED BY FOUR ANTI-REVERSE PAWLS.
THE LIGHTWEIGHT POLYCARBONATE PISTON IS FITTEDWITH A FULL STEEL BARFOR ADDED STRENGTH.
A STEEL CUT-OFF LEVERIS ALSO USED HERE, AS WELL AS A PRECISION ROTARY HOP-UP CHAMBER.
THE STRENGTH OF THE PARTS ALLOWS THEM TO WORK WITH M140 SPRINGS.

THE FINELY CRAFTEDROTARY HOP-UP CHAMBER WORKS PERFECTLY WITH THE HIGH QUALITY6.03MM PRECISION BARREL.
THE USE OF A PRECISION BARREL POSITIVELY AFFECTS THE RANGE AND ACCURACY OF THE REPLICA.
IT IS IMPORTANT TO REMEMBER TO USE HIGH QUALITY 6MM AMMUNITION.

THE REPLICA IS EQUIPPED WITHA FRONT M-LOK RAIL, MANUFACTURED UNDER THE STRIKE INDUSTRIES LICENCE.
THE REPLICA ALSO COMES WITH THE LATEST M-LOK ANGLE GRIP DESIGNED BY SPECNA ARMS.
A FOLDING SIGHT HAS BEEN FITTED TO THE UPPER RIS RAIL, WHICH DOES NOT INTERFERE WITH OPTOELECTRONIC SIGHTING DEVICES.
THANKS TO THE SLIDING BUTTSTOCK FINISHED WITH A NON-SLIP TEXTURED FOOT, IT IS POSSIBLE TO ADJUST THE LENGTH OF THE REPLICA TO THE BUILD AND THE SHOOTER'S PREFERENCES.
THE STANDARD FLAME SUPPRESSOR IS MOUNTED ON A 14-MM LEFT-HAND THREAD, WHICH MAKES IT POSSIBLE TO ATTACH A SOUND SUPPRESSOR IN ITS PLACE.

NOTE!!!
WHEN STARTING THE REPLICA FOR THE FIRST TIME, IMMEDIATELY AFTER CONNECTING THE BATTERIES, HOLD THE TRIGGER IN SAFE MODE FOR ABOUT 5 SECONDS TO ACTIVATE THE HAL™ MODULE